Philodendrons have the ability to make any room look modern yet earthy. But if their leaves are drooping or wilted, they will be unable to project that image. Therefore, it is essential to take care of them to help maintain their full and lush foliage which they are popular for.
How to make philodendron fuller?
Philodendrons can look sparse and malnourished sometimes because even though the leaves can grow fast. They tend to spread in a way that leaves gaps behind. They require proper pruning and maintenance to grow evenly which will help them grow and appear to be fuller and bushier.
In order to help the Philodendrons grow as thick, lush foliage, it won’t be too difficult as they are tropical plants with naturally dark and quite variegated leaves. They also manage to grow and spread out very quickly.
You can even dictate the direction of the vine and the manner in which they grow as they are vine plants.
Here is a list of some simple yet proven techniques that will help your Philodendrons growing the way you desire:
Prune the plants:
If you want the plant to appear fuller from the top, begin by cutting the stems that are growing out and falling downward with a pair of shears.
This will direct the new growth toward the areas at the top of the plant and create a fuller and bushier-looking plant.
Fertilize the soil:
You can use a solid fertilizer by adding the recommended amount to the soil or a liquid fertilizer by diluting it with water and pouring it on the soil especially if the plant has been in the same container for a few years.
If you do this at least once a month, it will cause a major change in your plant as it will promote growth and help it look healthier and heavier in appearance.
Adequate amount of sunlight:
If your Philodendron is kept in a dark corner of the house, it will likely grow at a slower rate and lose its variegation as all plants need sunlight to thrive.
So, you should consider moving it to a place where they can receive ample amounts of sunlight like near a window to make them healthier and fuller.
How do you make a Silver Philodendron fuller?
In order to make your Silver Philodendron more fuller, you need to add a few steps to the maintenance of your plant. You need to prune your plant to avoid the stems from trailing and looking thinner.
Silver Philodendrons don’t exactly require fertilizer but still thrive when the soil is fertilized. Compost or liquid seaweed can be used for fertilization. And let them soak up at least four hours of sunlight to grow into a healthy and more full plant.
It is best to remove old or damaged leaves and try to water the plant regularly.
How do you make a Philodendron Selloum fuller?
Philodendron Selloum can become fuller if you provide a moist, warm temperature they are accustomed to in their native land. It also grows fuller if it receives adequate sunlight for only a few hours each day.
But too much sun tends to burn its foliage and stunt the growth, so best avoid direct sunlight for too many hours. Philodendron Selloum also grows best in soil that is consistently moist.
While fertilizer provides a great help in making the leaves fuller and bushier but be sure to dilute the water-soluble fertilizer before use as too much salt in the fertilizer can burn the plant’s root and leaf margins.
How to make Philodendron Brasil (heartleaf) bushy?
You can make your Philodendron Brasil bushy by pruning it. The results will be better if your Philodendron Brasil is variegated. Pruning will help it maintain a bushy growth and also manage its size.
Every time your Philodendron Brasil begins to appear scraggly because of a lack of leaves, you can prune it by pinching back or trimming the stems. And cut directly after a leaf node.
You will notice new growth sporting from the pruned stem which will create a bushy Philodendron Brasil.
How to make Philodendron Micans bushy?
Pruning again is the answer to making your Philodendron Micans look bushy. By pruning the plant you can control its size and shape.
Philodendron Micans can begin to get very long and stretched out with fewer leaves like other vining plants. As they try to reach more light.
You can fix this, if you start to remove leggy vines, it will help create a plant that is bushier because pruning the vines encourages new growth.
You should prune your Philodendron Micans by cutting it ¼ inches above the node with sterilized pruning shears.
How to make Philodendron Silver Sword bushy?
If you want to help your Philodendron Silver Sword to develop into a lush and bushy plant, some new steps need to be implemented when it comes to caring for it.
First, it needs to be placed in an area with bright yet indirect sunlight as unfiltered sunlight can burn and damage the leaves of the plant.
Secondly, make sure the pot can keep it well-drained to help keep the soil moist but prevent the roots from being wet for a long time.
Lastly and most importantly, pruning will prove to be the most beneficial in making your Philodendron Silversword bushy. You should begin by sterilizing your pruning shears and cut the stems to promote thick and bushy foliage.
Why is my philodendron leggy?
Philodendrons commonly become leggy if they are not receiving sufficient light. They need a medium to bright light that reaches them indirectly for them to grow best.
Their leaves can get burned and damaged in strong, direct sunlight but if it is too low, it tends to elongate the stem and make the spaces between the leaves greater.
This gives it a leggy appearance. The biggest indicator will be the stems of your Philodendron will start to grow towards the light.
How to keep philodendron from getting leggy?
If you want to prevent your Philodendron from becoming leggy, you can begin by giving the plant a moss pole, trellis, or a bamboo cane to grow up in.
This will replicate their habitual environment as they wind around trees to get to the light. This will cause them to grow bigger leaves more closely together.
You can also prune the plant, this will make it use its energy into growing bigger leaves instead of growing upwards to reach the light.
And the most crucial step is to let them get sufficient light to grow in a fuller and bushier manner. When they have the right amount of light, they will not be motivated to grow towards it.
How to fix leggy philodendron?
When you notice your Philodendron has started to become leggy, you can fix it using simple tricks. You should begin by moving it closer to a light source. It can be a window, skylight, or grow light as long as the light isn’t too strong or direct.
You will notice the plant pushing out new leaves more quickly and creating a healthy and full look.
After moving your Philodendron near a bright spot, you can trim it. This will help change it into the shape and size you prefer. You should use a clean pair of sharp scissors to trim it and try to keep dirt away from getting into the fresh cut.
How do I encourage my philodendron to grow?
Philodendrons are tropical plants and the best way to encourage growth in them is by creating a similar environment for them. They grow best in moist places with bright and indirect lighting. You can create this by misting the plants and also keeping them next to one another.
It would prove to be beneficial to place them in a bright corner of the house as well. Watering and pruning them on a regular basis will also prompt them to grow and help them thrive.
When to prune philodendron?
Prune your Philodendron if you feel like the plant has begun to take up too much space in the room or it has begun to look too long. By pruning, you will be able to control the size and shape of your Philodendron.
It is also proven to be beneficial in helping the plant become fuller and bushier by prompting the growth of new leaves.
But before you prune your plant, check if it is really necessary. Otherwise, this step can be avoided.
How to prune philodendron?
If you want to prune a Philodendron, you should start by cutting the longest stems which are most likely the oldest and have started to look yellow and spindly. Now, begin to cut the parts where it joins with the top of the plant.
Some stems can also lower below the soil, cutting them off at the soil line will help. Lastly, water the plant immediately after you have pruned it.
How to prune a large philodendron?
If you want to prune a large Philodendron, you can begin by taking sharp, clean scissors or even a razor blade and cut the entire leaves off at the base of the leaf stem.
If you want to uncover the lower stem, remove the leaves there too. It is useful to cut the stems back if you want to reduce the size. This should help with the growth of new leaves and stems.
Simple things like an adequate amount of sunlight and water coupled with pruning can help a Philodendron plant to grow to be more full and bushy. If that is what you desire, you will surely benefit from incorporating these steps in the maintenance of your plant.